Specification
Product Name | Push Button Switch |
Model | IB12A-Q10Y-D/PC |
Mounting Hole | 12mm |
Operation Type | Momentary |
Switch Combination | 1NO |
Head Type | Domed head |
Terminal type | 4 Pin Terminals |
Illuminated or not | Yes |
Led Voltage | 12V (or 3V/5V/12V/24V/110V/220V/others) |
Led Color | Blue(Or Red,green,yellow,orange,white) |
Illuminated Type | Dot led illuminated |
Enclosure Material | Plastic with black housing |
Delivery Days | 1-7 days |
Contact Resistance | 50 mΩ max |
Insulation Resistance | 1000MΩ Min |
Dielectric Intensity | 2000VAC |
Operating Temperature | -20°C ~+55°C |
Wire Soldering | Acceptable and with fast shipping |
Accessories | Nut, Rubber O-ring,Resistor |
What You Get | 1X Push button switch: 12mm, 12V Blue LED, Momentary,black housing |
Everything about these are easy and these which are one of the few which protrude a few mm are exactly what
you was looking for rather than the old fashioned door bell buttons. It used an inexpensive dual coax plate - removed the coax plugs, and used the pre-drilled holes to enlarge to the correct size for these buttons.
Exactly what you needed to make a set of LEDs button controlled. maybe you have never attempted anything
like this and these were so easy to install it only took me a few minutes to get it right. you didnt even have to
consult youtube! They are super sturdy and seem really well made, probably way more than what you really needed but for the price you was really
