Use this switch to replace the light switch, horn switch or other control switches in the cars/ boats/ trucks. Bright and comfortable Led and metal appearance make the switch very cool.
It can use as a door bell, entrance guard push button switch in the outdoors. As it is IP65, it can work relatively harsh environment.
It is also a good choice to use it as a replacement switch of household Appliances. Such as table lamp switch, PC switch, Audio switch.
As it is full metal appearance and with a rubber ring, the switch achieves IP65 waterproof degree. It can used in wet environment, such as boat control panel, kitchen, outdoors etc. Note that this switch can be used under water.
The metal shell and push part is not easy to damage.
The Mechanical work Life is 500,000 times
The switch use Silver Alloy contact to make the Electrical Work Life more than 100,000 times.
APIELE Switch use pole-less lamp beads, bright and dazzling brightness, long service life. The work life of the led light is more than 40,000 hours.
Product Name | Push Button Switch |
Model | IB12S-P10Z-E/N |
Mounting Hole | 12mm |
Operation Type | Latching (Maintain) |
Switch Combination | 1NO |
Head Type | Flat round head |
Terminal type | 4 Pin Terminals |
Illuminated or not | Yes |
Led Voltage | 12V (or 3V/5V/12V/24V/110V/220V/others) |
Led Color | Blue (Or Red,green,yellow,orange,white) |
Illuminated Type | Ring Led illuminated |
Enclosure Material | Brass nickel |
Delivery Days | 1-7 days |
Contact Resistance | 50 mΩ max |
Insulation Resistance | 1000MΩ Min |
Dielectric Intensity | 2000VAC |
Operating Temperature | -20°C ~+55°C |
Customized symbol,colored housing | Acceptable and with fast shipping |
Accessories | Nut, Rubber O-ring |
Momentary pushbutton switches may be used in a variety of applications including cars, motorcycles, boats, computers, LEDs, and electronics projects. Use them as a power switch for your computer, a boat horn or starter switches for cars, trucks and automobiles, and other applications in which temporary activation of an electrical current is desired
This switch has a protection rating waterproof, meaning it can withstand exposure to heavy rain, splashes, etc., without damage
Constructed of nickel plated copper; resists rust and corrosion
Installation: Cut mounting hole into the panel using a 1/2" drill bit. Screw the threaded "neck" of the switch into the panel cutout hole and secure it on the reverse side of the panel with the included metal nut. The included rubber O-ring may optionally be used for additional water resistance by placing the ring between the top of the neck (just behind the faceplate) and the front of the panel. Package includes switch, metal nut and rubber O-ring
Max Switch Rating: 250V AC/DC 2A, Panel Cutout Diameter: 1/2" (12mm)
