IB16S-P11F-D
· Momentary switch: Push & Hold,ON; Release,OFF
· The switch and LED are separated, LED can be on all the time or only on when switch is on,depending on how you wire it
· Great for electromagnetic starter, relay, Horn Button Switch, PC Power Switch or any circuit controls
· With a wire connector (not included), you don't need to solder the terminals, made installing the switch pain free
· IP65, IK08 protection can be used in wet or dusty environment
· 1NO1NC
What's the Pushbutton Switch
This is a perfect choice if you are in need of a rugged push button! These push buttons are a very tough, small, panel-mount momentary switch with an illuminated blue LED ring. It is a SPDT with 16mm threading. These buttons are rated up to 3A and 250VAC while the LED is rated for 5-12V. The higher the voltage value, the brighter the LED. You can add a wire connector, then you don't need to solder the terminals, make installing very easy.
What's the Momentary Switch
Momentary switch, normally open, remain in ON state as long as being pressed
What's the Momentary Switch Used for
Most often momentary switches are used for circuits control in electromagnetic starter, stuff like relay, Horn Button Switch, PC Power Switch or any circuit controls
What's Note
-These switches come with a rubber O-ring which makes them splash resistant but they can NOT be submerged in the water
What's the Customer Support
If you have any questions, feel free to contact us by E-mail any time.We get professional customer service staff and technician to help you
Product Name | Push Button Switch |
Model | IB16S-P11F-D |
Mounting Hole | 16mm |
Operation Type | Momentary (Reset) |
Switch Combination | 1NO1NC |
Actuator Shape | Flat Round Head |
Terminal type | 5 Pin Terminals |
Illuminated or not | Yes |
Led Voltage | 12V (or 3V/5V/24V/110V/220V/others) |
Led Color | Blue (Red, Green, Yellow,White,Orange available) |
Illuminated Type | Dot Led illuminated |
Enclosure Material | Nickel Plated Brass |
Delivery Days | 1-7 days |
Contact Resistance | 50 mΩ max |
Insulation Resistance | 1000MΩ Min |
Dielectric Intensity | 2000VAC |
Operating Temperature | -20°C ~+55°C |
Customized symbol,colored housing or Connector | Acceptable and with fast shipping |
Accessories | Nut, Rubber Waterproof O-ring |
Customized Order Confirm | 1. What Led Color? 2. What Led Voltage? |
What You Get | 1X Push button switch: 16mm,12V Blue LED,Momentary,Brass nickel housing |
Note: If you need Customized LED, please inform us by mail:
1. What Led Color? 2. What Led Voltage?
