· Body material: Stainless Steel, Plastic, Electric Parts.
· Normally Open switch, without led indicator.
· Current rating: 5A/250V AC. Head protection level: IP67,IK08.
· Contact resistance: less 50mΩ. Insulation resistance: over 100mΩ.
· Commonly used as vehicle horns, ignition switch, doorbells, and car boat outdoor project.
Non-Latching Switch:
A push button switch is a momentary or automatic return switch which causes a temporary change in the state of an electrical circuit only while the switch is physically actuated. An automatic mechanism (such as a Spring) returns the switch to its default position immediately afterwards, restoring the initial circuit condition.
Note:
Installation instruction and wiring diagram are not included in the package.
The terminals are small, need to be careful when soldering the wires on to them. Recommended solder within 3 seconds.
Professional installation is highly recommended.
Product Name | Push Button Switch |
Model | IB25S-P11F/S |
Mounting Hole | 25mm |
Operation Type | Momentary |
Switch Combination | 1NO1NC |
Head Type | Flat Round Head |
Terminal type | 4 Pin Terminals |
Enclosure Material | Stainless Steel |
Delivery Days | 1-7 days |
Contact Resistance | 50 mΩ max |
Insulation Resistance | 1000MΩ Min |
Dielectric Intensity | 2000VAC |
Operating Temperature | -20°C ~+55°C |
Customized colored housing or Connector | Acceptable and with fast shipping |
Accessories | Nut, Rubber Gasket |
Wiring Harness | Click here HARNESS and choose item No.: IB25S Harness |
What You Get | 1X Push button switch: 25mm, Flat, Momentary |
Note: If you need latching function (Self-Locking) , please inform us by mail,thanks!
